Huion KAMVAS Pro 13 GT-133 Stops Ink Flow

[rondfranks]

I just purchased a Huion KAMVAS Pro 13 GT-133. I realize it's not explicitly supported, but I thought I would post in case someone else has workaround.

Tried reinstalling latest driver and changing available settings, but it didn't help. If I open BlackInk the mouse works fine, but as soon as I start drawing with the tablet it stops displaying anything on the screen (just the white background on the page), whether from the tablet or the mouse.

[bonnie]

To have a look of your problem could you send us the file BlackInk.log ? (here the walkthrough)

Also you can disable Precise stylus position in the Stylus settings of Black Ink like in this screenshot:


Thank you

[none]

Annotation 2018-12-16 015210.jpg (111.29 KiB) Viewed 23164 times

:x if you have two butons on your pen try to configure the first so it can invert between the brush and the eraser. I dont know why but black-ink starts with the eraser on my tablet . I have a Huion GT156HD-v2

[bonnie]

thank you for your tip

[rondfranks]

Sorry for the delay. Both ideas did not work unfortunately. I did try calibrating the tablet in Black Ink. Already did so in the Huion app. Ether way, I can click on anything in the UI but not the canvas/layers. The cursor is there, but nothing is painting with the stylus or even the mouse.

Very odd, this is the only app acting this way using the tablet.

[rondfranks]

[u2bleank]

Hi rondfranks,

I have contacted Huion but no more answer for now
What happen if you only use the mouse from the start ( do not move with your stylus ). Is it possible to draw something ?
What happen if you press the E shortcut with painting with the mouse ?

[rondfranks]

Okay, after messing with the Huion panel for a while I got the secondary button to switch between brush and eraser like was posted earlier. It seems to be stuck in eraser mode like was posted, when first used.

This is strange also. Even though I was able to get it to work by switching from eraser to brush, the preferences window input preview show no pressure signal. But it appears to be working nonetheless. I see a signal on the azimuth and tilt though. Also, precise cursor position has to be turned off also to show any painting on the screen.

[u2bleank]

Ok I just received a Test Driver directly from Huion which could fix the problem
Can you please install it and tell me if it works.

Download HuionTablet_WinDriver_v14.7.74.362

[saune]

I had the same problem. Luckily I stumbled upon this thread from the steam forums, which led to me figuring out a work around.
My Huion driver is newer than the one linked above, and the problem still exists. I've narrowed it down to conflicts between the default Black Ink shortcuts. Unless your driver can map different behaviors to hold a button vs press a button, you have to flush (i.e. clear) one of the 2 eraser shortcuts.
I prefer to erase with my brush so I remapped the 'toggle the eraser' [which toggles to an eraser brush] to a different button, and I have to hold my button to erase (you can't remove the 'hold' parameter from a shortcut in v0.357.2643). For ergonomics I had to change the button assignment on my pen which I'm not thrilled about (since it will affect all my other programs, as my driver does not have program specific profiles), but ce la'vie.

I hope this helps others out, as I expect the problem might not be only for Huion.