Pressure adjustment

To talk about brush creation and controllers
User avatar
bonnie
 
Posts: 279
Joined: 11 Jun 2012, 10:41

Pressure adjustment

Postby bonnie » 05 Feb 2018, 10:37

You want to adjust your stylus pressure for Black Ink?

The best way is to go directly through the graphic tablet drivers and set Black Ink with the parameters you want.

Image

If you don't have this option you will need to customize your brushes independently.

Let's select the default Felt Pen

Image

and let's open the Brush Preview (Ctrl+P)

Image

where we will draw naturally a small example for your settings

Image

Then let's open the controllers (C) panel and choose the opacity parameter
Even if it seems complicated at first glance what interests us is to see the Pressure entry, which turns out to be simple all things considered :relief:

Image


Once you've found it, we'll apply a multiply to modify its strength.

Go to operators and take the Mul node (orange)

Image

and we'll put the pressure on the input.
After that we modify its value while looking at our reference drawing to see how it influences our layout.

Image

Once it's done, you can save your custom brush by opening the brush manager (M)

Image

and dragging the mouse over your selected brush.

Image

Image


Of course you can set other parameters with pressure but you can as well modify the parameter range like this example

Image


To finish, if you want to tell something you are welcome ;)

Return to Brush Making

cron