Hue Saturation and Value Parameters

[tragicsaros]

So looking in the brush editor, I've always noticed the parameters "Hue, Saturation, and Value"

I've never played with those parameters in until now.

I was trying to create a brush where the value is changed depending on the pressure applied, but It does not seam like anything I add the the perimeter is having an effect on it.

I've tried it on the hue and saturation as well, with the same results.

So my question is, "is there a specific way I'm meant to be approaching this that I'm not seeing?"

[u2bleank]

Hi,

Do you have checked the little Enabled like in this picture :


Here a little video

[tragicsaros]

No I did not. Thank you very much.

[yar]

It's seems color shifting don't work properly.
- Hue shifting shifts only to red for every color and only with 0 on right margin. With other degree it not shifts at all.
- Saturation and value works good but only with 0 degree for hue on right margin no matter plugged or unplugged hue control.
Please check it.
Thanks.

[u2bleank]

ok We will look on that for the next update