Page 2 of 2

Re: Huion KAMVAS Pro 13 GT-133 Stops Ink Flow

PostPosted: 01 Oct 2019, 21:23
by shelghost
The problem is still there... years after ! I can't understand how this cannot be fixed in a year...
Everytime you make a change on your brush, you have to switch from eraser to brush. On a regular drawing this is thousand of clics !
Come on Bleank, you can do better ! Your application is the only one with that sort of problem on Huion tablets !
Please do something !

Re: Huion KAMVAS Pro 13 GT-133 Stops Ink Flow

PostPosted: 02 Oct 2019, 14:24
by u2bleank
shelghost wrote:The problem is still there... years after ! I can't understand how this cannot be fixed in a year...
Everytime you make a change on your brush, you have to switch from eraser to brush. On a regular drawing this is thousand of clics !
Come on Bleank, you can do better ! Your application is the only one with that sort of problem on Huion tablets !
Please do something !


Do you have tested with the driver I posted earlier ?
The problem is that Huion doesn't set a correct pen ID..

Re: Huion KAMVAS Pro 13 GT-133 Stops Ink Flow

PostPosted: 24 Oct 2019, 11:20
by mrjaco
I had the same problem. Luckily I stumbled upon this thread from the steam forums, which led to me figuring out a work around.
My Huion driver is newer than the one linked above, and the problem still exists. I've narrowed it down to conflicts between the default Black Ink shortcuts. Unless your driver can map different behaviors to hold a button vs press a button, you have to flush (i.e. clear) one of the 2 eraser shortcuts.

Re: Huion KAMVAS Pro 13 GT-133 Stops Ink Flow

PostPosted: 31 Oct 2019, 11:22
by jorgepp
I also had the same problem and I solved it thanks to this thread.