Page 1 of 1

bug?

PostPosted: 28 Oct 2017, 18:35
by taro
Why is it drawn obliquely on the pen when using a brush?

Re: bug?

PostPosted: 30 Oct 2017, 14:31
by bonnie
I am not sure to understand..

Is it the stroke smoothing (video example here) - Hold Z shortcut: set the drawing smoothness

If not, could you be more precise please?

Re: bug?

PostPosted: 04 Nov 2017, 13:32
by taro
bonnie wrote:I am not sure to understand..

Is it the stroke smoothing (video example here) - Hold Z shortcut: set the drawing smoothness

If not, could you be more precise please?



Thank you for the reply!
I tried it while adjusting the smoothness but I can not see the change.

Re: bug?

PostPosted: 11 Nov 2017, 12:55
by taro
When activating Bi, it is written below as "WRN invalid stylus calibration detected Calibrate it now."

Also, opening "Preferences" etc will repeat the blinking like the image. It stops while touching the bar, but starts flashing when released.

Is this because my PC specification is simply missing?

Re: bug?

PostPosted: 13 Nov 2017, 09:13
by u2bleank
Hi Taro,

Can you please give me your config ? ( CPU, GPU, RAM, Os ).
If you have mulitple GPU try to force black ink to run using the imtegrated graphics and while slow, it doesnt experience the flickering effect.
If no try to enable the VSync ( Main Menu > Window> Preferences > GPU )

Re: bug?

PostPosted: 17 Nov 2017, 12:37
by taro
u2bleank wrote:Hi Taro,

Can you please give me your config ? ( CPU, GPU, RAM, Os ).
If you have mulitple GPU try to force black ink to run using the imtegrated graphics and while slow, it doesnt experience the flickering effect.
If no try to enable the VSync ( Main Menu > Window> Preferences > GPU )



Blinking was improved with Vsync setting. Thank you!
My setting is as per the image.

Re: bug?

PostPosted: 17 Nov 2017, 13:59
by u2bleank
Ok thanks for the report. We will investigate this problem further

Re: bug?

PostPosted: 30 Jul 2018, 10:12
by taro
It was improved. Thank you very much! :D