Hue Saturation and Value Parameters

To talk about brush creation and controllers
tragicsaros
 
Posts: 21
Joined: 21 Feb 2015, 14:38

Hue Saturation and Value Parameters

Postby tragicsaros » 06 Feb 2017, 13:02

So looking in the brush editor, I've always noticed the parameters "Hue, Saturation, and Value"

I've never played with those parameters in until now.

I was trying to create a brush where the value is changed depending on the pressure applied, but It does not seam like anything I add the the perimeter is having an effect on it.

I've tried it on the hue and saturation as well, with the same results.

So my question is, "is there a specific way I'm meant to be approaching this that I'm not seeing?"

User avatar
u2bleank
 
Posts: 1005
Joined: 11 Jun 2012, 10:41

Re: Hue Saturation and Value Parameters

Postby u2bleank » 06 Feb 2017, 18:15

Hi,

Do you have checked the little Enabled like in this picture :
Image

Here a little video
Image

tragicsaros
 
Posts: 21
Joined: 21 Feb 2015, 14:38

Re: Hue Saturation and Value Parameters

Postby tragicsaros » 06 Feb 2017, 18:30

No I did not. Thank you very much.

yar
 
Posts: 1
Joined: 24 Dec 2017, 17:37

Re: Hue Saturation and Value Parameters

Postby yar » 24 Dec 2017, 18:02

It's seems color shifting don't work properly.
- Hue shifting shifts only to red for every color and only with 0 on right margin. With other degree it not shifts at all.
- Saturation and value works good but only with 0 degree for hue on right margin no matter plugged or unplugged hue control.
Please check it.
Thanks.

User avatar
u2bleank
 
Posts: 1005
Joined: 11 Jun 2012, 10:41

Re: Hue Saturation and Value Parameters

Postby u2bleank » 05 Jan 2018, 09:00

ok We will look on that for the next update ;)


Return to Brush Making